Cookie preferences

Choose which optional services may run on this browser. Rejecting them does not prevent shopping or contacting us by email or our contact form.

Essential — always active

Sign-in, security, your privacy choice and basic interface preferences.

Withdrawing permission reloads this page to stop services already running. It does not delete messages or records already held by us. Your privacy rights.

OneStow

How to Use Your OneStow

Three ways to load coffee, two ways to brew. Here's everything, step by step.

1. Load your coffee

Small capsules

  1. 1. Place the capsule in the small-capsule adapter.

  2. 2. Close the adapter over the capsule.

  3. 3. Insert the adapter into the brewing chamber.

  4. 4. Screw the chamber onto the cup.

Ground coffee

  1. 1. Fill the basket with fine, espresso-grind coffee.

  2. 2. Press the lid onto the basket.

  3. 3. Seat the basket in its holder.

  4. 4. Insert the holder into the brewing chamber.

  5. 5. Screw the chamber onto the cup.

Large capsules

  1. 1. Place the large capsule in the large-capsule holder.

  2. 2. Insert the holder into the brewing chamber.

  3. 3. Screw the chamber onto the cup.

  4. 4. Attach the cup and chamber to the machine.

Pouring water into the tank

2. Add water

Remove the top lid and pour up to 60 ml (2 fl oz) of water into the tank, then put the lid back on. Use cold water if you want the machine to heat it, or hot water to brew immediately.

3. Choose your mode

Heat & Brew

Water
Cold or room-temperature water
Button
Double-click the button
Light
Indicator flashes orange while heating

Brews automatically once the water is hot.

Instant Brew

Water
Hot water
Button
Press and hold for 2 seconds
Light
Indicator flashes green

Starts extracting right away.

Cold Shot

Water
Cold water
Button
Press and hold for 2 seconds
Light
Indicator flashes green

Extracts without heating, for iced drinks.

Tip: a single click shows the battery level.

Charging

Plug the included USB-C cable into a wall adapter, power bank or car USB port. A full charge takes about 3–4 hours and gives up to ~4 heated brews or ~50 brews with pre-heated water (manufacturer figures).

Machine parts being rinsed

Cleaning

After brewing, run one cycle with fresh water and no coffee to flush the inside. Unscrew the chamber, then rinse the adapters, basket and cup under the tap and let them dry.

Tips for a better shot

  • ✓Use fine, espresso-grind coffee — coarse grinds brew weak and fast.
  • ✓Don't overfill the tank: 60 ml is one full shot.
  • ✓Charge fully before a trip; heating cold water uses the most battery.
  • ✓For a stronger cup in cold weather, start with warm water.